Tesco of America, Inc. - Supplier to the Automotive Service & Tire Retreading Industries - Tire Balancers, Tire Changers, Alignment Equipment, Material, Supplies

The sliding table, with long travel stroke, connected to the tool arm carriage, allows the wheel to be easily picked up and positioned on the self centering chuck. The controls are located on a movable stand which allows the operator to work the machine from the position of this choice. Moreover, for the operator s perfect safety, there is a low voltage supply to the controls (24 V).

Once the tool arm has been moved to the "non working position", its travel is automatic, allowing it to be shifted from one side of the wheel to the other at considerable speed and complete safety. The tool arm can also be clamped to the carriage in any working position thanks to the synchronized rack connection.

The universal self centering chuck is activated by a hydraulic cylinder and can lock all rims from 14 to 56 inches from the inside or from the central hole. It can rotate in both directions at two different speeds. Four sheet of metal, prevent squashing between the chuck flanges.

The tool, which may be tilted or swiveled as required, enables every operation to be carried out at top speed. The support system for bead breaker disk, without inside bracket, eliminates all friction, thus improving performance. A mechanical tool arm tip lock device, prevents the arm from being moved to its "non working position" if the tool has been removed.

For total operator safety, a non return check valve, fitted directly onto cylinder, keeps the wheel locked even in case of electrical failure or hose rupture. Moreover, a pilot operated dual seal check valve, prevents the spindle carrier arm from dropping if the hydraulic circuit accidentally breaks

*Technical data*
Handles rims from	14" - 56"
Max. wheel diameter	2300 mm.
Max. wheel width	1065 mm.
Working pressure	130 BAR
Noise level when running	< 70 dB (A)
Gear box motor (2 speed)	1.3/1.85 Kw 3 Ph 400V 50 Hz
Pump motor	1.5 Kw 3 Ph 230/400V 50 Hz
Weight (with accessories)	750 Kg.
*Supplied accessories*
Bead lifting lever	cod. 217615
Rim lever	cod. 417620
Rim pliers	cod. 271605
Lube hand pump	cod. 280919
*Optional accessories*
Set of 4 jaws for alloy rims	cod. 801.280913 KCL 56
Set of 4 extensions from 48" to 56"	cod. 801.280915 KPL 4
Bead guide lever	cod. 801.280916 LG 56
Pair of bead clamps	cod. 801.271957 MV 50/2
Roller for tubeless	cod. 801.271609 RT 50/2

Dimensions

W=1065 mm
d=14" - 56"
D=2300 mm max